Automatic Escalator Aligner  - 100mm, 125mm, 150mm, 200mm
Automatic notch finder/escalator aligns and escalates wafers for ID mark reading. Unit features
operator selected tilt angle for enhanced ID readability. Optional LED light bank furnishes optimal
lighting conditions for ID reading. H-Square's patented notch finding mechanisms result in
exceptional aligning accuracy. User-friendly control panel facilitates ease of use. Cost-effective
design and operator visual reading provides wafer tracking at a fraction of the cost of fully
automated OCR systems. ESD safe construction. Class 1 cleanroom compatible.
AETWFA4
100mm Flat
AETWFA5
125mm Flat
AETWFA6
150mm Flat
AETWNA6
150mm Notch
AETWFA8
200mm Flat
AETWNA8
200mm Notch
Manual Escalator - 75mm, 100mm, 125mm, 150mm, 200mm
Manual escalator lifts wafers incrementally when cassette is placed on unit. Wafers are tilted 25º
degrees to enhance ID readability. ESD-safe and chemical resistant construction makes unit idea for all
applications. Standard model ETAS1 includes front guide to ensure cassette is placed correctly.
Manual escalator, custom, same as standard ETAS1 model but designed without the front guide
plate.  Operators use the back guide to place the cassette correctly.
ETAS1-3-001
75mm
ETAS1-4
100mm
ETAS1-5
125mm
ETAS1-6
150mm
ETAS1-8
200mm
ETAS8-003
200mm for 26th Slot Cassettes
ETAS1-8-007
200mm with H-BAR Out
Five Wafer Lifter - 100mm, 125mm, 150mm, 200mm
Five wafer lifter elevates five wafers simultaneously to allow easy and safe access for wafer wands or inspection.
Precise mechanical lift and selection mechanism provides clean, smooth operation and durability. Unit eliminates the
need to place vacuum tips between consecutive wafers, which can cause scratching. Compact design saves cleanroom
space. Accommodates most high and low profile cassettes. Ergonomic and Safety Department approved.
WB5L1-456
100mm, 125mm, or 150mm (Pick One Size)
WB5L1-8
200mm
SQ21541-13
100mm
SQ21541-2
125mm
SQ21541-10
150mm
Single Wafer Presenters - 50mm, 75mm, 100mm, 125mm, 150mm, 200mm
WP2
50mm
WP3
75mm
WP4
100mm
WP5
125mm
WP6
150mm
WP8
200mm
Programmable semiautomatic presentation station with wafer rotation. Lifts wafers out of cassettes. Applications
include removing/replacing wafers to/from a cassette or 100% visual inspection or identification of individual wafers.
Orientation of the wafer can be "flipped" 180 degrees for special backside or front : front back: back applications.
Special v-groove saddle gently lifts wafers without contacting others in the cassette. Units can be used with vacuum
wands or outside diameter mechanical edge Class 1 cleanroom compatible.
WPR4
100mm
WPR5
125mm
WPR6
150mm
WPR8
200mm
Programmable semiautomatic presentation station lifts wafers out of cassettes. Applications include
removing/replacing wafers to/from a cassette or 100% visual inspection or identification of individual wafers. Special
v-groove saddle gently lifts wafers without contacting others in the cassette. Units can be used with vacuum wands or
outside diameter mechanical edge picks. Class 1 cleanroom compatible.
A manual wafer presenter station for removing/replacing SINGLE wafers to/from a cassette or for 100% inspection or
identification of individual wafers. Special v-groove saddle gently lifts wafer without contacting others in the cassette.
Tool can be used with vacuum wands or outside diameter mechanical edge picks. Class 10 cleanroom compatible.
HL-2
50mm
HL-3
75mm
HL-4
100mm
HL-6
150mm
HL-8
200mm
H-Square manufacturers wafer lifter blocks where the wafers are lifted from a process cassette either above
the top plane of the cassette or only partially lifted at some sub level.  H-Square has designs for lifting all
wafers or only specific wafers being removed from the cassette.  Please contact H-Square Custom Products
Department or your local representative for more information.
Stand alone stainless-steel floor-mounted manual FOUP stand provides ergonomic safe means to gain access to wafers
off-line. Operator-friendly design aligns FOUP, FOSB, or open bottom 300mm cassette, with the operator’s body and line-
of-sight. The 360 degree rotation with positive stop points allows any operator to find a comfortable position for safely
handling 300mm wafers to/from the specified carrier. The FS-002 features a telescoping stand for ergonomically
adjusting the height of the FOUP for tall or short operators. Table-top designs are also available through H-Square’s
Custom Products Department. Simple design for reliability and low maintenance.
Special Application Presenters
FS-002
300mm Stand
MISC2100
Contact H-Square for Options and Ordering Part Numbers
Wafer Presenters
Copyright © 2017 - H-Square Corporation  Santa Clara, California, USA All Rights Reserved
←CLICK HERE to be added to
H-Square's Mailing List
←CLICK HERE to download the
H-Square Product Catalog
Automation & Wafer Handling Tools for the Electronics Industry